#4 Oval Paint Pixie Brush
$17.00
#4 Oval Brush
In stock
Product Description
Approx. 2 1/2″ wide (the size of a deck of cards) good for base coating
Perfect for blending colors
Use as a edge brush
Natural & Synthetic Blended Bristle
- Great for all types of paint and sealers. Ideal for chalk and clay paints.
- Perfect paint brush for base coating. Also great brush for dry brushing, feathering or flat blending!
- PAINT PIXIE DUSTY PAINT BRUSH – 2 1/2″ WIDE FLAT BLENDING BRUSH
Paint Pixie Dusty Brush is ideal size brush to hold in your hand for great control and ease of painting. MADE IN ITALY
Approx. 2 1/2″ wide the width of a deck of cards and 5″ Top to bottom
Natural & Synthetic Blended Bristle
- Saturate a small pad of cloth with Feed-N-Wax and wipe evenly onto the wood surface.
- Let stand at least 20 minutes and wipe off excess.
- Polish out with a clean soft cloth and buff to a shine.
Precautions
Always test in an inconspicuous area to check results before applying to entire wood surface. CAUTIONS: COMBUSTIBLE: CONTAINS PETROLEUM DISTILLATE. Keep away from heat, sparks and flame. Use with adequate ventilation. Avoid prolonged contact with skin. FIRST AID: If swallowed, do not induce vomiting. Call physician immediately. KEEP OUT OF REACH OF CHILDREN
Feed-N-Wax Wood Polish & Conditioner is ideal for enhancing the natural depth of grain while providing added protection and luster to furniture, antiques, and cabinets. Feed-N-Wax helps introduce conditioning oils that “feed” the wood while providing a protective coating of beeswax and carnauba wax. Feed-N-Wax can be used on finished or unfinished wood to help preserve and keep the wood from drying out, fading, or even cracking. Feed-N-Wax should be used whenever the piece looks faded or dry, usually every 3 to 6 months.
- Enhances the natural beauty and depth of grain in finished and unfinished wood
- Prevents drying and deterioration of all wood finishes
- Polishes all wood surfaces to a soft luster with a protective coating of carnauba wax and beeswax
- Use Feed-N-Wax after Restor-A-Finish to maintain the newly restored finish
- For food-prep surfaces, use Howard Butcher Block Conditioner or Cutting Board Oil
Spray it on the surface. After one minute, wipe clean.
