Howard Steel Wool

Product Description

Howard Product’s Steel Wool is the finest steel wool available for the application of RESTOR-A-FINISH or FEED-N-WAX. Our super fine (0000) steel wool is excellant for use on both finished and unfinished wood surfaces. Always with caution.

1. Saturate a small pad of cloth with Feed-N-Wax and wipe evenly onto the wood surface.
2. Let stand at least 20 minutes and wipe off excess.
3. Polish out with a clean soft cloth and buff to a shine.

Precautions

Always test in an inconspicuous area to check results before applying to entire wood surface. CAUTIONS: COMBUSTIBLE: CONTAINS PETROLEUM DISTILLATE. Keep away from heat, sparks and flame. Use with adequate ventilation. Avoid prolonged contact with skin. FIRST AID: If swallowed, do not induce vomiting. Call physician immediately. KEEP OUT OF REACH OF CHILDREN

Feed-N-Wax Wood Polish & Conditioner is ideal for enhancing the natural depth of grain while providing added protection and luster to furniture, antiques, and cabinets. Feed-N-Wax helps introduce conditioning oils that “feed” the wood while providing a protective coating of beeswax and carnauba wax. Feed-N-Wax can be used on finished or unfinished wood to help preserve and keep the wood from drying out, fading, or even cracking. Feed-N-Wax should be used whenever the piece looks faded or dry, usually every 3 to 6 months.

• Enhances the natural beauty and depth of grain in finished and unfinished wood
• Prevents drying and deterioration of all wood finishes
• Polishes all wood surfaces to a soft luster with a protective coating of carnauba wax and beeswax
• Use Feed-N-Wax after Restor-A-Finish to maintain the newly restored finish
• For food-prep surfaces, use Howard Butcher Block Conditioner or Cutting Board Oil

Spray it on the surface. After one minute, wipe clean.