Regular Kotton Klenser – 16 oz

Product Description

Kotton Klenser For use on all Wood finishes – kitchen cabinets, woodwork, paneling and formica, ceramic and plastic, tile, vinyl, leather, marble, painted surfaces, whitewall tires. Cleans and removes water and heat marks, wax and silicone buildup, tree sap, and smoke-damage residue.

“I purchased Kotton Klenser in an effort to find a good cleaner for wood finishes, especially on antiques, that would prevent me from having to strip the finish and, thus, the patina. I had an old mantle clock that belonged to my great grandmother that seemed an ideal attempt. It was covered with cigarette residues from decades of exposure, such that there really was no wood grain to speak of anymore.

My pictures, I hope, speak for themselves. I was cautious with such an old family item not to leave it on too long, but I was able with some repeated applications to reveal the original wood grain and with a little polish bring it back to a nice sheen. I probably could have removed a little more safely, but didn’t want to damage the original finish.

This product is an amazing cleaner, and I certainly plan to buy more as needed!”

“This formula is an incredible product. We have used this product for years and are thrilled that it is offered now by Amazon. It is the only product for wood that instantly revives all damaged and dried out wood whether doors or furniture. I highly recommend this product..”

CAUTION: To get the results you desire from each Kotton Klenser  product, always begin with an unnoticeable spot on the piece first. Regular Kotton Klenser – like other products – can
remove a finish if not handled with care. And be sure to remove cleaner completely after use. It is recommended that you use gloves  when using Kotton Klenser  products.

REJUVENATING ORIGINAL OIL, WAX, or VARNISH FINISH on WOODS

STEP 1 Apply Regular Kotton Klenser  in manageable small area(s) of the piece with paint brush (in case of heavily dirt-coated or damaged finishes, apply with 4/0 steel wool). Leave on a few minutes or only long enough to clean; wipe off thoroughly. In cases of stubborn dirt, rub with 4/0 steel wool; repeat process if necessary.

STEP 2 Apply Protective Wood Feeder with brush. Let Feeder absorb into the wood (absorption time can vary from 6 to 12 hours). If wood absorbs the first coat immediately, reapply Feeder. After wood has absorbed the fine oils and conditioners, wipe excess Feeder off and buff following grain of wood with 4/0 steel wool.

STEP 3 Maintain the beautiful finish with regular applications of Kotton Klenser  Lemon Oil Beeswax Polish.

FOR REJUVENATION of DAMAGED, ORIGINAL VARNISH FINISH on WOOD
(Checking or Crocodile)

NOTE: Sometimes a finish in this condition lays loosely on the wood.
Regular Kotton Klenser  will lift loose finish and leave the intact finish that
is still adhering to the wood.

STEP 1 Apply Regular Kotton Klenser  liberally; let sit as long as 24 hours or until damaged finish is softened. Rub softened finish with 4/0 steel wool until heavy damage is rubbed off; finish rubbing until smooth with 4/0 steel wool. (Always follow the grain of the wood.)

STEP 2 Apply Protective Wood Feeder; let wood absorb until it can absorb no more. Wipe off excess with soft cloth, then buff off with 4/0 steel wool following grain of wood.

STEP 3 Apply Kotton Klenser  Lemon Oil Bee Lemon Oil Beeswax Polish on a regular basis to keep wood in excellent condition.